Hardware reference guide

7535 Hardware Reference Guide 49
Chapter 4: Connecting
Bluetooth Wireless Connections
• An existing ActiveSync partnership between the 7535 and the PC. This
partnership must be established through the USB connection.
To connect:
1. Select Blue + 0. The Start Menu opens.
2. Select Settings. The Control Panel opens.
3. Double-click on the Bluetooth Device Properties icon.
The Bluetooth Manager dialog opens.
4. Ensure that the development PC is powered on and that its Bluetooth
radio is enabled.
5. Click on the Scan Device button and wait for the 7535 to complete its
scan (approximately 20 seconds). Services offered by discovered
devices, such as the PC, will be displayed in the list box. Each service
of a device receives a separate entry:
If the discovered device has been given a unique name by its owner,
that name is used to identify it.
Note: You can change the device-name and description of your 7535’s radio by
clicking on the System icon in Control Panel, which will open the System
Properties page. Click on the Device Name tab to access the menu and
change your settings. Then click on OK.
Although the name will have changed in the Property screen, the radio only
reads it on boot-up. Therefore, for the changes to take effect, you must cold-
boot or warm-boot the 7535.
6. A discovered device may display several service profiles that it can use
to communicate. Supported services that can be activated include: dial-
up networking service, serial connection for printing, and LAN access
using PPP.
7. Highlight the PC’s service profile in the list, then double-click on it. A
properties menu appears.
8. Select Active to make this service active.