Hardware reference guide

Chapter 3: The Software
Locations Of Applications
42
7535 Hardware Reference Guide
An application can be installed either to RAM or to flash memory. If the application
is installed to RAM, it is completely lost when the unit is cold-booted.
The default directory for files installed through ActiveSync’s Application Manager
is
\Program Files\<appname>, where <appname> is the name of the program. On
the 7535, this directory resides in RAM and will be lost during a cold or warm boot.
The application may be installed into flash, but only if the application can be run
from some folder other than the
\Windows folder, which is not placed in the flash
file system.
If the application is installed into the 7535’s internal flash memory in the folder
\Flash Disk, the application will remain in the 7535, even after a cold or warm
boot.
Application executables placed in
\Flash Disk\Startup will be automatically
started when the operating system starts after a cold boot. This will not happen after
a resume from suspend.
Applications may be placed as .cab files in
\Flash Disk\Startup. When the
7535 cold-boots, it will automatically install any
.cab files located in this folder.
Applications may also be placed in memory cards.