Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
108 Psion Teklogix Mobile Devices SDK Developers Guide
14.3.3.7 UPC A Settings
Non-decoded Scanner
These settings apply to an internal or external non-decoded scanner using the UPC A symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Decoded Scanner
These settings apply to an internal decoded scanner using the UPC A symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Imager (Deprecated)
These settings apply to an internal imager scanner using the UPC A symbology.
•Tab
Barcodes
•Scanner:
Non-decoded
• Menu Item
UPC A
Scanner Setting Key: Barcode\UPCA
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Inc Num Sys 0 = off 1 = on 0 Include Number Sys
Include Chk 0 = off 1 = on 0 Include Check
Addendum 0 2 0 Addendum
Tran s m i t C o d e ID
Character
0 = off 1 = on 0 Transmit Code ID Char
•Tab
Barcodes
•Scanner:
Decoded (internal)
• Menu Item
UPC A
Scanner Setting Key: Barcode\UPCA\Decoded
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
UPCA Transmit Check Digit 0 = off 1 = on 1 UPC-A Check Digit
UPCA Preamble 0 2 1 UPC-A Preamble