User manual

Chapter 3: Getting To Know The WORKABOUT PRO
Locking Modifier Keys
40 WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual
3.4.2.2 Locking Modifier Keys
Note: The locking behaviour of the modifier keys can be changed so that, for
example, pressing a modifier key once will lock the key ‘on’. Refer to
“One Shots” on page 91 for details. Note too that by default, the
[FN/ORANGE] key is locked ‘on’ when pressed only once.
When a modifier key is locked ‘on’, it will remain active until it is pressed again to
unlock or turn it off.
To help you identify when a modifier key is locked ‘on’, the key is represented in
the shift-state indicator icon with a black frame around it.
Figure 3.5 Shift-State Indicator Icon – Locked Modifier Key
Once a modifier key is unlocked or turned off, it is no longer displayed in the
shift-state indicator icon.
3.4.3 The Keys
The [SHIFT] Key
The [SHIFT] key is used to display uppercase alpha characters and provide access to
the symbols above the numeric keys. You can lock this key ‘on’ so that when you
press an alpha key, an upper case character is displayed. When you press a numeric
key, the associated symbol on the numeric key is displayed on the screen.
If you press the [SHIFT] key twice, it is locked ‘on’ essentially acting as a [CAPS]
key, displaying uppercase characters. In this state, if you type a numeric key, the
number rather than the symbol above it is displayed. Press [SHIFT] again to turn the
[CAPS] function off.
The Arrow Keys
The grey Arrow keys are located near the top of the keyboard, directly below the
[SCAN] bar. The arrow keys move the cursor around the screen
–up, down, left and
right. The cursor is the flashing box or underline character that indicates where the
next character you type will appear.