User manual

WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual A-7
Appendix A: Summit Client Utility (SCU)
Global Settings Tab
Choosing this config means that WZC must be used to define the following radio
and security options: SSID, Auth Type, EAP Type and Encryption.The SCU settings
for ThirdPartyConfig include: Client Name, Power Save, Tx Power, Bit Rate and
Radio Mode. These SCU settings along with SCU global settings and the WZC
settings will be applied to the radio module.
A.4 Global Settings Tab
The Global Settings tab allows you to define radio and security settings that apply
to all configs (profiles), along with settings that apply specifically to the SCU.
The Global Settings in the table below can be edited in the SCU:
Global Setting Description Value Default
CCX features
Activates three CCX features:
AP-assisted roaming, AP-speci-
fied maximum transmit power &
radio management.
On, Off Off
Cert Path
Directory where certificates for
EAP authentication are stored.
Valid directory path up
to 64 characters.
Dependent
on device.
Frag Thresh
Packet is fragmented when
packet size (in bytes) exceeds
threshold.
Integer from 256 to
2346.
2346
G Shortslot 802.11g short slot timing mode. Auto, Off, On Auto