User manual

Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual 175
Chapter 6: Settings
The Bluetooth GPRS Phone
6.25.3 The Bluetooth GPRS Phone
Once you’ve completed the Bluetooth settings, you can go ahead and set up
communication through your Bluetooth-equipped phone.
1. Before you begin, make certain that the Bluetooth phone is turned on, that
the Bluetooth radios in your WORKABOUT PRO and phone are enabled
(turned on), and that the hand-held and phone are within 10 metres of each
other. Both should be discoverable.
2. Tap on Start, Settings and then tap on the Connections tab.
3. Tap on the Connections icon. In the next screen, tap on Add a new modem
connection.
Figure 6.82 Make New Connection Screen
4. Type a name for the connection.
5. Tap on the Select a modem drop-down menu, and choose Bluetooth. Tap
on the Next button.
6. Make certain that the phone is discoverable. Some phones also need to be
pairable in order to accept a bonding request. Refer to your phone documen-
tation for additional information.
7. If the phone appears in the My Connections list, skip to step 13.
8. In the list, tap the phone and then tap on the Next button.
9. In the PIN screen, type a personal identification number (PIN)
–you can
enter up to 16 characters.