User manual

Chapter 6: Settings
Setting Up A Network Card
164
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Server Settings
Figure 6.70 Servers Tab
Important: If your server assigns IP addresses dynamically, you will not need
to change these settings.
Servers requiring assigned IP addresses may also need a way to map computer
names to IP addresses. The WORKABOUT PRO supports two name resolution
options: DNS and WINS.
Your ISP or network administrator can determine which name resolution you need,
and can also provide the server address. In addition, you will want to ask if alternate
addresses are available. An alternate address may allow you to connect when the
primary server is not available.
6.24 Setting Up A Network Card
Network (802.11b) cards are used to connect directly to a network. You’ll be able to
browse the Internet, download e-mail and so on. You do not need to create a new
connection on your WORKABOUT PRO.
Before you begin, make certain that your network card is inserted in the
WORKABOUT PRO.
1. Obtain the following information from your network administrator: user
name, password and domain name.
2. When the network card is inserted in your unit for the first time, the Network
Settings screen is displayed automatically so that you can configure the card.
If it does not appear, or if you want to change settings, tap on Start, Settings.
Tap on the Connections tab and then on the Network Cards icon.