Specifications

10. Attach the end-cap.
Figure 7 Attaching The End-Cap
11. Tighten the 4 end-cap screws to a torque of 3 lb-in (0.34 N·m).
12. Slide the hardware power switch to turn battery-backup power back on.
Figure 8 Switching Internal Battery-Backup Power On
13. Replace the battery and battery cover.
14. Verify the installation.
End-Cap
On The S Version
ON
ON
On The C Version
April 15, 2008
8100171 Rev. A Sheet 3 of 3
COMPANY HEADQUARTERS AND CANADIAN SERVICE CENTRE
Psion Teklogix Inc.
2100 Meadowvale Boulevard, Mississauga
Ontario, Canada L5N 7J9
Tel:[phone]
Fax:[phone]
E-mail:[e-mail]