User guide

PingerPro User Guide

Psiber Data Systems Revision 1.00

Select the Profile button with the

< arrow to return to the Main Setup Screen or select the bottom Link

button to continue on to the Link Setup Screen.

Setup Profile Screen Main Setup Screen

Link

Select the Link Button from the Main Setup Screen. The Speed parameter choices are Auto-negotiating

or Fixed speed/duplex. Auto selects all five speed/duplex modes; 10H, 10F, 100H, 100F or 1000F. In

Fixed, only ONE speed/duplex can be selected. Select the Save button to save the configuration.

Setup Copper Link Screen Setup Fiber Link Screen SFP Module Details Dialog Box

The Interface setting appears in the PingerPro 75 where there is an option to test either Copper or Fiber

cable. Once Fiber is selected, the SFP details and capabilities are displayed. Select the SFP Module

Detail button to show all the details of the connected SFP. Select OK to return to the Link Screen.

Select the Link button with the

< arrow to return to the Main Setup Screen or select the bottom IP

Address button to continue on to the IP Address Setup Screen.