User guide

PingerPro User Guide
34
Psiber Data Systems Revision 1.00
Length measures and displays the distance to an open or short of each wire pair in a cable. Disconnect
the cable under test from a switch or Wiremap Terminator prior to starting the length measurement. Select
the Settings button to change the NVP for the connected cable by selecting the gray button to display a
numerical keyboard. The highest NVP is 74 and the lowest is 65. Select either Meters or Feet to display
the length in that unit of measurement. Select OK to return to the Length Screen. Select the play button
to run the test.
Length Screen Length Settings Screen
Select the Length button with the < arrow to return to the Main Cable Test Screen or select the bottom
Tone button to trace the wire.
Tone is used to locate a punch down or trace a cable using a Cable Tracker CT-15 probe (Optional). The
tone frequency is adjustable. Select a gray tone button to start the tone.
Tone Screen
Select the Tone button with the < arrow to return to the Main Cable Test Screen or select the bottom Port
ID button to send a signal to the attached Port.