User guide

PingerPro User Guide

Psiber Data Systems Revision 1.00

Cable Test

The Cable Test will check the physical wire connected to the PingerPro. Cable Test includes Wiremap,

Length, Tone and Port ID. Select the Cable Test button from the Home Screen. Select the Wiremap to

test the cable.

Home Screen Main Cable Test Screen

Wiremap verifies proper cable wiring and detects split pairs. Connect the Wiremap Terminator to the

cable under test before starting the Wiremap test. Selecting the Play button will start the test. The

Wiremap test will continue to run until the Stop button has been pressed. Select Save to save the last

tested cable.

Wiremap Screen before Test Passed Wiremap Screen Failed Wiremap Screen

Select the Wiremap button with the

< arrow to return to the Main Cable Test Screen or select the bottom

Length button to test the length of the cable to an open or short.