User guide

PingerPro User Guide
32
Psiber Data Systems Revision 1.00
Select the Settings button again to display the Settings screen. Select all three buttons including Show
Hostname, Show MAC and Replies only. Select OK to display only the targets that have passed the ping
test with both the Hostname and MAC address displayed on the Main Ping Screen. Select any tested
device for more information. Select the Save button to save the results.
Settings Screen Main Ping Screen w/Details
If Continuous ping is selected in setup, the Pinger Pro will continue to ping a specific target until the user
selects the OK button to stop pinging. The banner will show the number of ping packets the PingerPro
has sent to the target device. The Ping Target Details Dialog box will be displayed with information
including Hostname, IP/ MAC address, number of attempt, lost and bad packets. The minimum, average
and maximum round trip times are also displayed.
Main Ping Screen Continuous Ping Dialog Box Ping Target Details Screen