User guide

PingerPro User Guide
31
Psiber Data Systems Revision 1.00
Select the Settings button again to display the Settings screen. Select the
< and > arrows to scroll
through the User Defined Profiles. Select OK to set a new User Defined Profile and return to the Main
Ping Screen to run a new test. Select the Refresh button to start the test.
Settings w/Factory Default Settings w/TEST Profile Main Ping Test Screen
This new test displays ping packet responses sent across the entire subnet. The top information bar
indicates that 254 IP addresses were sent ping packets and only 5 devices responded.
Use the
V arrow to scroll through the device to see which devices were found. The PingerPro IP address
will be displayed in gold to show its own information. Select on the Pinger Pro IP address to bring up the
Ping Target Details. Select OK when finished.
Main Ping Screen test Completed Ping Target Detail Screen
LINK INFO