User guide

PingerPro User Guide

Psiber Data Systems Revision 1.00

The Switch Info (LLDP/CDP) Screen decodes LLDP (Link Layer Discovery Protocol) and CDP (Cisco

Discovery Protocol) frames which are detected from the nearest connected switch. Scroll through the

entire data by selecting the up and down arrows or by swiping the stylus on the screen up/down and side

to side.

LLDP/CDP Test Screen

Select the LLDP/CDP Switch Info button with the

< arrow to return to the Main Auto Test Screen or select

the bottom button to continue to the Security Results Screen.

The Security Results Screen shows the Authentication Process the PingerPro goes through to connect to

a network using 802.1X through the EAP-MD5 protocol. The PingerPro will display green check marks for

passed steps and red X's for failed steps. This will help determine where the problem is located within the

802.1X Secure network.

Main Auto Test Failed Screen Security Warning Message Security Screen with Failures