User guide

PingerPro User Guide

Psiber Data Systems Revision 1.00

Select the Link button to bring up the Link Results Screen. This screen will display the partner’s

capabilities and actual connected link status. The linked port is shown with the actual link parameters

including connection type (LAN or NIC), speed (10/100/1000) and duplex mode (Half or Full). If VLAN was

selected under setup, the VLAN ID and Priority will be displayed.

Main Auto Test Pass Screen Copper Link Screen Link Screen with VLAN

For the PingerPro +Fiber, the unit measures Optical Power Received (Rx) and Transmitted (Tx) when

Fiber is selected. The measurement in displayed in 0.1dBm increment with a Range of -32dBm to +8dBm

and accuracy +/- 2 dBm.

Fiber Link Screen

Select the Link button with the

< arrow to return to the Main Auto Test Screen or select the bottom button

to continue to the IPv4 Address Results Screen.