User guide

PingerPro User Guide
21
Psiber Data Systems Revision 1.00
Auto Test
Once Setup has been configured, select the Auto Test button on the Home Screen to display the Main
Auto Test page. Select the play button to start the Auto Test.
Note: The Auto Test can be performed immediately, using Factory Default Profile, without navigating
through and changing parameters within the Setup Menu.
Home Screen Auto Test Screen w/all tests Auto Test Screen w/few tests
Depending on how the Auto Test is setup, the test will range from 5 to 60 seconds. Once completed,
green checkmarks will be displayed for tests that have passed. If the test fails, then a red button and an X
will indicate at which part the test failed. As shown below, the Auto Test in progress screen shows a red
count down of the time it will wait until a LLDP or CDP packet is found before the timeout is reached.
Main Auto Test Screen in Progress Main Auto Test Screen Failed