User guide

PingerPro User Guide
11
Psiber Data Systems Revision 1.00
MAC Address
In this screen, the MAC Address parameters are displayed. The user has a choice of the Factory or a
User Defined MAC address. The Factory Default MAC Address of the PingerPro CANNOT be changed.
User Defined allows the user to enter a MAC address of their choice for device cloning purposes. MAC
cloning allows the PingerPro to simulate another network device by using its own MAC address to detect
issues originating from that device.
Select the User Defined gray button to go to a Hexadecimal keyboard screen to enter a MAC address.
After entering the desired address, select OK to return to the MAC Address screen. Select the Save
button to save the configuration.
The Serial Number of the unit is also displayed.
Setup MAC Address Screen Hexadecimal Keyboard
Select the MAC Address button with the < arrow to return to the Main Setup Screen or select the bottom
Ping button to continue on to The Ping Setup Screen.
700000