User manual

UANPAV V1.0 PSI Audio AVAA User Manual 6
Power ON LED (Green)
Mains power is present and the speaker is ready
to use.
Limiter or Overheat or Standby LED (Red)
The LED will flash red when the limiter of the
AVVAA is working. This means that the AVAA is
working at its fully capacity and can’t absorb any
further even if the level is increased. This is simply
and indication that the AVAA has reached its fully
capacity. It does not represent an issue.
A continuously red LED even when sound level
decrease, means that the amplifier is operating
under overheated conditions and has turned
into standby mode.
3.2 Before you start
Special care has been taken in the packaging of your PSI Audio equipment. Before you start to
install it, please check that the following parts are included:
• AVAA
• Warranty certificate of calibration
• Data sheet
• PSI AUDIO User Manual (this manual)
3.3 Front Panel Description