User manual

UANPAV V1.0 PSI Audio AVAA User Manual 4
• Do not operate the AVAA in a confined environment:
The AVAA is designed to be positioned in a corner of a room with its rear side panels against the
walls. However it is important that the rear panel is left with sufficient circulation and ventilation of
air for cooling purposes. Make sure there are a few centimetres free behind the AVAA such as in a
right angle corner.
• The AVAA is designed to work in rooms of minimum 10 m2. It is designed to be positioned in a
corner. Apart from the 2 rear walls and the floor avoid positioning any large reflective objects less
than 1.5 m away from the front of the AVAA as these may cause of instability.
• Do not operate or install the AVAA near any kind of heat source.
• Only operate the AVAA with accessories specified by PSI Audio.
2.2 Service
The AVAA contains no user-serviceable parts. Service must be performed by qualified
personnel. The primary fuse must be replaced by exactly the same type and rating. The
unit must not be opened by the user – risk of a severe electric shock.
Servicing is required when:
• the AVAA has been damaged in some way, such as when the power-supply cord or plug is
damaged,
• the AVAA has suffered from exposure to rain or moisture,
• liquid has been spilled into the AVAA,
• objects have been dropped into the AVAA,
• the AVAA does not work correctly.
Spare part supply :
• For ordering, please contact your authorized dealer, mentioning your AVAA model and serial
number (see point 3.3.).
Keep the opening
behind the AVAA clear
to prevent overheating
Avoid large reflective
objects near AVAA as
they may cause
instability