User manual

UANPAV V1.0 PSI Audio AVAA User Manual 3
1 Introduction
Thank you very much, and congratulations on your decision to purchase PSI Audio Active Velocity
Acoustic Absorber.
Carefully following the instructions in this manual will ensure that your system will give you many years of
reliable and trouble free operations.
For the latest information, help or advice, please contact your local PSI Audio representative or PSI Audio
directly.
Relec S.A.
Rue des Petits Champs 11 a+b
CH-1400 YVERDON (Switzerland)
Tel : [phone]
Fax : [phone]
[e-mail]
www.psiaudio.com
2 Safety Instruction
2.1 Warnings
• Please read and follow the instructions carefully prior to operating the AVAA.
• An AVAA positioned above floor level represents a fall hazard. Please make sure your
loudspeakers are always securely positioned or mounted in a stable position and can’t fall. In
particular make sure no child can make them fall.
• Please do not open the AVAA - risk of electric shock.
• Make sure not to expose the AVAA to any form of liquids. For cleaning, use only a dry cloth. In
order to prevent spills, do not place any containers containing liquid on the AVAA. Do not use the
AVAA close to water as this may create an electric shock hazard.
• Only use three wire mains cables and connectors with earth (grounding) according to your country
standard.
• Check your AC voltage and make sure that the voltage setting and fuse on the rear of the chassis
are set correctly.
This symbol alerts the user to the presence of electrical
power within the product that may be of sufficient
magnitude to constitute a risk of electric shock.
This symbol alerts the user to important operating and
maintenance (servicing) instructions or warnings.