User manual

UANPAV V1.0 PSI Audio AVAA User Manual 10
7 Troubleshooting
7.1 Power on LED does not light up.
Please check that the power switch is set on the ON position and that the mains cable is properly
connected to the mains. If the problem persists, check the fuse, the voltage selector and the AC
power voltage. If this doesn’t solve the problem, please contact PSI Audio or a PSI Audio authorised
dealer.
7.2 AVAA is unstable and emits noise
In normal operating mode the AVAA doesn’t emit any audible sound. The presence of reverberating
objects in the near field of the AVAA may destabilise the system and produce noise or whistling. If
the AVAA becomes unstable you will distinctly hear it until the overload protection is reached, the
system stops briefly and starts again.
- Remove any large reflective object that is close to the AVAA.
- Try positioning the AVAA in a different location.
- If necessary reduce the sensitivity of the device by turning the potentiometer anti-clockwise
towards “MIN”.
8 C.E. & RoHS Conformities
PSI Audio products have been tested and calibrated according to the highest quality standards.
An individual frequency response diagram is provided with each loudspeaker.
The PSI Audio products have been tested according to EU directives and amendments:
Low voltage directive (LVD), 2006/95/EC
Electromagnetic compatibility directive (EMC), 2004/108/EC
The relevant technical standards are:
EN 60065: 1998 Audio, video and similar apparatus – Safety requirements (Class 1)
EN 55103-1/E1: 1996 Product Standard – Emission
Audio, Video and audio-visual apparatus for professional use
EN 55103-2/E1: 1996 Product Standard – Immunity
Audio, Video and audio-visual apparatus for professional use
This product is manufactured according to the European directive 2002/95/EC
9 Warranty
Our loudspeakers undergo several steps of quality control to ensure they leave our factory in perfect
condition. We offer a warranty against any manufacturing or material defect for a period of 5 years on all
electronics and transducers and 2 years on the wooden cabinets. Only Relec SA is able to qualify a
manufacturing or material defect and its eligibility to be covered by the warranty. Wear and tear is not
covered by the warranty.
Please contact your reseller for any query about warranty or servicing.
We kindly remind the user that unauthorised servicing can void the warranty. In order to provide a quality
service, we ask the user to always include the warranty card at each service.
If goods need to be returned to the manufacturer (Relec SA), the symptoms must be clearly mentioned. In
case of warranty, the parts and labour costs are at the charge of the manufacturer. If no defect in