User`s guide

ManualsBrandsPSE ManualsHunting EquipmentHunting Equipment

REGISTRATION

Fill out the reverse side of this

page completely, remove it, and

mail to:

PSE Warranty Registration

P.O. Box 5487

Tucson, AZ 85703

PN 94418

Rev. 11/06

LIMB

BOLT

SIGHT

ARROW

REST

GRIP

STABILIZER

IDLER WHEEL

CABLE

STRING

PEEP

SIGHT

STRING

LOOP

CABLE

GUARD

CABLE

GUARD

SLIDE

BOW

SLING

RISER

CAM

TYPICAL ONE-CAM BOW

LIMB

POCKET

Thank you from the entire PSE

family for purchasing a PSE bow.

Your PSE bow was manufactured

from the finest materials

available and handcrafted with

pride in the USA. With proper

care and use you will enjoy this

product for years to come.

We at PSE wish you much

success in the archery field you

have chosen to pursue. Please

read this entire booklet before

shooting or adjusting your bow.

Remember, most adjustments to

a compound bow should be

made in a bow press. Whenever

shooting a bow, be certain of

your target as well as what else

lies downrange.

BOW TERMINOLOGY

PRECISION SHOOTING EQUIPMENT, INC.

Compound Bow

USER’S GUIDE

Summary of content (16 pages)

PAGE 1
PRECISION SHOOTING EQ UIPMENT, INC . Compound Bow USER’S GUIDE BOW TERMINOLOGY IDLER WHEEL LIMB STRING LIMB POCKET CABLE LIMB BOLT PEEP SIGHT SIGHT CABLE GUARD SLIDE CABLE GUARD GRIP STRING LOOP STABILIZER Thank you from the entire PSE family for purchasing a PSE bow. Your PSE bow was manufactured from the finest materials available and handcrafted with pride in the USA. With proper care and use you will enjoy this product for years to come.
PAGE 2
YOUR LOCAL AUTHORIZED PSE DEALER IS YOUR BEST SOURCE FOR INFORMATION AND ASSISTANCE. VISIT THEM FOR THESE AND OTHER TYPICAL SERVICES: 1. 2. 3. 4. 5. 6. 7.
PAGE 3
PRECISION SHOOTING EQUIPMENT, INC . Compound Bow USER’S GUIDE BOW TERMINOLOGY IDLER WHEEL LIMB STRING LIMB POCKET CABLE LIMB BOLT PEEP SIGHT SIGHT CABLE GUARD SLIDE CABLE GUARD GRIP STRING LOOP STABILIZER Thank you from the entire PSE family for purchasing a PSE bow. Your PSE bow was manufactured from the finest materials available and handcrafted with pride in the USA. With proper care and use you will enjoy this product for years to come.
PAGE 4
Compound Bow USER’S GUIDE General Operating Instructions • Always inspect your bow thoroughly before each shooting session to insure that it is in good working order. Check for worn or missing components and have them replaced as required, i.e. bushings, spacers, etc. • Inspect your arrows to insure that they are straight and that each nock is in good condition. A cracked nock can break when fired from the bow and cause the bow to "dry fire" resulting in possible injury to the archer and damage to the bow.
PAGE 5
Compound Bow USER’S GUIDE Setting-Up Your Bow NOCKING POINT PLACEMENT: Finger shooters: For the initial setting, install the nocking point on the bowstring approximately 5/16" plus the arrow width above a point where a horizontal line from the rest intersects the string. Release Aid shooters: Install the nocking point the width of the arrow above a point where a horizontal line from the rest intersects the string.
PAGE 6
Compound Bow USER’S GUIDE Installation of Accessories Arrowrest/Overdraw: The arrowrest or overdraw should be installed according to the instructions received with the product. It is usually mounted to the riser in the threaded hole on the side opposite the shelf (hole "A") using the hardware provided with the arrowrest or overdraw. Sight: The sight should be installed according to the instructions received with the product.
PAGE 7
Compound Bow USER’S GUIDE CAM ADJUSTMENTS STANDARD ONE CAM Draw Length: To change the draw length in 1” increments, the cam must be changed. See your local PSE dealer for information on how to obtain a replacement cam. For minor changes in draw length, the bow must be placed in a suitable bow press and tension relieved from the string and cable. Moving the string to the post that will shorten the effective length of the string will shorten the draw length by ½”.
PAGE 8
Compound Bow USER’S GUIDE Synergy Universal 2-Cam System The Synergy Universal Cam is the most advanced entry-level two-cam system available. Both draw weight and draw length adjustments are incorporated into the design and can be changed without the use of a bow press. The system comes with three pairs of modules (8912, 8913 and 8914) that allow 6 different draw length settings and 3 different weight settings. Each system will function on both righthanded and left-handed bows.
PAGE 9
Compound Bow USER’S GUIDE Nova Synergy Universal MODULE NO. 11 11 11 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 WEIGHT SETTING H M L H M L H M L H M L H M L H M L APPROX.
PAGE 10
Compound Bow USER’S GUIDE HYPERLITE™ POCKET FEATURES HYPERLITE™ UNIBODY POCKET NOTICE The new Hyperlite™ Pocket System is unlike that on any other bow. Some special considerations must be followed so that the system continues to function properly. ·IMPORTANT: Do not “bottom” the limbs against the riser on a bow equipped with the HyperLiteTM Unibody Pocket System! Traditional limb pockets use a “bottomed” position to determine peak weight.
PAGE 11
Compound Bow USER’S GUIDE MACH X The X Technology bows come with many unique features that will enhance your archery experience. MULTI POSITION SIGHT MOUNTING The Mach X bow is equipped with a multi-position sight-mounting feature allowing the sight to be mounted to optimize your sight window. Mount the sight in the middle position and sight in the bow. Your pin grouping should be centered on the sight body. If the pins are too high, move the sight to the upper mounting position.
PAGE 12
Compound Bow USER’S GUIDE NO BOW PRESS OPTION The X Technology bows do not require a bow press to relax the strings for service. Locking Tab Screw NEVER ADJUST OR REMOVE THIS SCREW! Limb Bolt Locking Screw Relax Strings for Service 1. Loosen and remove the 4 locking tab screws (see Figure 2). Damage may occur to the limbs at the pin holes if the locking tab screws are not removed before fully backing out the limb bolts. 2. Loosen the 4 limb bolt locking screws. 3.
PAGE 13
Compound Bow USER’S GUIDE WARNING: DO NOT SHOOT ABOVE BOW’S LISTED PEAK WEIGHT The limbs have been optimized to perform their best at peak weight. Even though your bow may be capable of being adjusted to higher weights, DO NOT DRAW OR SHOOT any PSE bow higher than peak weight. Drawing or shooting the bow above peak weight could cause serious injury as well as void the warranty. Module Screws Draw Stop Screw w/ washer (shown in #11 module, 80% position) Module Dot ”.
PAGE 14
Compound Bow USER’S GUIDE LIMITED LIFETIME WARRANTY ALL PSE MANUFACTURED BOWS / ACCESSORIES / KING PRODUCTS Each PSE Bow is backed by a PSE Limited Lifetime Warranty to the original owner for the life of the product. Product will be replaced or repaired to restore it to its original performance. Cables, strings, or wearable items are not covered by this warranty. Evidence of abuse, mishandling, misuse, or alteration to any PSE product voids any claim to warranty.
PAGE 15
) CREDIT CARD NUMBER Mail to: PSE P.O. Box 5487 Tucson, AZ 85703 SIGNATURE AMEX MC DISC VISA OR INCLUDE CHECK OR MONEY ORDER Daytime Phone ( City Address State HOLDING STEADY DVD 41302 DANGEROUS GAME DVD 41349 Name ALL THE RIGHT MOVES DVD 41401 WHITETAIL FEVER 4 DVD 41350 Please select two videos from below: YES, SEND ME TWO DVD VIDEOS AND MY FREE CAP! FREE CAP 45354 Postal Code (Zip) AZ residents add $ 1.32 Total (AZ residents) $ 24.26 Shipping & Handling $ 3.
PAGE 16
THANK YOU FOR SELECTING PSE Act now on this one-time offer: $ 99 18 Buy any TWO of these exciting PSE DVDs and receive a FREE cap! CAP STYLE SHOWN MAY VARY Offer good in the United States Only BOWHUNTING THE WILD WEST 3 From Alaska to Arizona, some of the best hunts in the West. – DVD ALL THE RIGHT MOVES Ralph Ramos takes you on amazing elk hunts while teaching you his successful calling and hunting techniques.