Specifications

82 QuickScan™ 1000 Programming Guide
GENERAL
FEATURES
Read Verification by Symbology
To set the minimum read requirement for a desired symbology:
1. Scan the SET label.
2. Scan one symbology label below to select the symbology to be verified.
3. Scan the label on the following page representing the amount of times
you wish a bar code label of that symbology type to be read before
transmission to the host.
4. Repeat steps one through three above until read verification has been
selected for all symbologies you desire to be verified.
5. Scan the END label.
SET --------------------------------------------------
--------VERIFY UPC-A
VERIFY UPC-E -------------
--------VERIFY EAN-8
VERIFY EAN-13 ------------
--------VERIFY INSTORE LABEL
1
VERIFY CODE 39 ------------
1
Instore labels are UPC-A bar codes with a number system character of 2 or 4, and
EAN-8 and EAN-13 bar codes with a Flag 1 character of 2.
READ VERIFICATION SYMBOLOGY TYPE