Specifications

14 QuickScan™ 1000 Programming Guide
RS-232
INTERFACE
PSC RS-232 Interface Selection
Scan this single label to enable the standard PSC RS-232 interface (do not scan the SET
bar code before, or the END bar code after scanning the interface selection
bar code).
SNI RS-232 Interface Selection
Scan this single label to enable the SNI RS-232 interface (do not scan the SET bar
code before, or the END bar code after scanning the interface selection
bar code).
RS-232 Communication Parameters
This section contains the following RS-232 communication parameters in the order
listed:
• Baud Rate
• Data Bits
• Parity
• Stop Bit(s)
• Hardware Handshaking (CTS/RTS)
• Software Handshaking (Xon/Xoff)
• ACK/NAK Options
• Intercharacter Delay
Go to the sections titled Symbology Selection and General Features in the back of this
programming guide if you want to change any other settings for this interface.