Specifications

Programming Parameters
E-2 Falcon
®
PT40
Table E-1. Programmable Settings and Parameter Terms
For information about using PAL, including installation instructions refer toUsing
PALPRO40 to Collect Data starting on page 2-7, or to the Portable Applications
Library (PAL) User’s Guide, available at
www.pscnet.com from the Product Manuals
link.
For an overview of using PPG to program the PT40, refer to
PT Program
Generator (PPG) on page 1-10. For complete information refer to the PT Program
Generator (PPG) User’s Manual, available at
www.pscnet.com from the Product
Manuals
link.
The human readable portion of the barcode symbol, as shown in this manual, is
optional and not required for scanning purposes.
Settings Description
Code Parameter The “human” name for programming options.
ID#
The “PT40” name for programming options. For example, to set a
Code 39 minimum label length, enter
01 when programming the
PT40. Programming ID numbers given in this appendix can be
used with all programming methods.
Type Indicates the kind of setting to use for each code parameter:
On/Off
A toggle.
1 turns the parameter on, and 0 turns it off.
Value
Requires a two-character entry (e.g.,
02 for two beeps after each
good read, or
05 for a length of five).
String
Uses one or more ASCII characters, followed by // to indicate
the end of the string.
Immediate Takes effect as soon as the ID number is entered.
Acceptable Input
Gives the settings or range of settings that you can use for each
code parameter.
Predefined Defaults
Tells how the parameter is set when you select predefined default
D0, D1, or D2 (refer to Ta b l e E- 2).
2340.book Page 2 Wednesday, January 29, 2003 12:50 PM