Specifications

Using XFER32
Product Reference Guide 3-3
XFER32 Setup
When you start XFER32, the user interface, shown in Figure 3-1, opens.
Figure 3-1. XFER32 User Interface
To prepare for data transfer between the PC and the PT40, click on the Setup
button to open the
Setup dialog box, which contains three tabbed sections:
•
General Tab on page 3-3.
•
Transfer Tab on page 3-5.
•
Logging Tab on page 3-6.
The settings in these dialogs can be modified or customized to meet your com-
munications requirements.
General Tab
The General tab is the first tab displayed on the XFER32 Setup dialog box.
Modify the PT40’s
Connection, Baud Rate, Flow Control, Protocol (ACK/
NAK and XModem are the only protocols supported by the PT40) on this tab.
Figure 3-2. General Tab
2340.book Page 3 Wednesday, January 29, 2003 12:50 PM