Specifications

Using PALPRO40 to Collect Data
Product Reference Guide 2-11
4. The location ID and item ID appear together on the third line of the
screen, separated by a comma, and the second prompt remains on the
screen.
• The PT40 is ready to accept another ID for an asset at the current
location.
5. When finished collecting asset IDs for the location, press the <F4> key
to return to the first prompt.
6. Repeat steps 2 through 5, above, until IDs for each asset at every loca-
tion is collected.
7. Press the
<F4> key to return to the first prompt.
8. Press the
<F4> key again to return to the application menu.
Refer to
Uploading Data to the Host PC starting on page 3-2 to upload your data.
The PT40 stores the collected data in a single ASCII text file. When uploading
the file to the PC, the data appears as a list. Each line in the list contains two
fields separated by a comma. The first field is the location, and the second field
is the item’s identification number. The example in
Figure 2-7 is part of a data
file uploaded from a PT40 that used
ASSETPRO to collect data.
Figure 2-7. ASSETPRO Collected Data in ASCII text file
ITEM ID
¤
WH3E, 004322
F3=REV F4=EXIT
BLDG1,000295
BLDG1,001862
BLDG1,000945
BLDG1,001008
BLDG1,000036
BLDG1,000490
BLDG2,000288
BLDG2,002596
2340.book Page 11 Wednesday, January 29, 2003 12:50 PM