Specifications

Introduction

1-4 Falcon

PT40

Figure 1-1. Falcon PT40 Keypad

Data Keys

Use the twelve (12) data keys to enter letters, numbers, and other characters. If

you enter an incorrect number or character, press the

<CLR> key to move the

cursor back one position. Press and hold the

<CLR> key to clear an entire line.

Normal Mode.

By default, data keys yield numbers.

Shift Mode.

To input letters, press the <SH> key to enter Shift mode. The

Shift mode cursor is displayed with reverse video. The PT40 remains in Shift

mode until you press

<SH> again.

Press the data key once, twice, or more times to cycle through the letters until

the desired letter appears on the display. After the last letter in the sequence for

that key, the next keypress yields the number. Another keypress starts the letter

sequence again. Letters are only available in upper case.

Function Keys

Enter Key

Scan Key

Clear Key

Data Keys

Navigation Key

Shift Key

Power Key

Backlight Key

2340.book Page 4 Wednesday, January 29, 2003 12:50 PM