Specifications

The Keypad
Product Reference Guide 1-3
Resetting the PT40
Sometimes you will need to reset the PT40. Both Soft Reset and Hard Reset
return the PT40 to the opening display screen (refer to
Figure 1-1 on page 1-2)
and return a unique series of beeps and tones to verify the reset.
Soft Reset: Use a soft reset to reboot a PT40 when there is power available.
Scan the following reset bar code:
Hard Reset: Use a hard reset to reboot a PT40 without power.
1. Remove the main battery or external power supply.
2. Press and hold the
<CLR> and <ENT> keys while reinserting the main
battery or reconnecting the power supply.
The Keypad
The keypad on the PT40 has three types of keys: action keys, function keys,
and data keys. Each key produces a beep when pressed.
•Refer to
Figure 1-2 on page 1-4 for an illustration of the Falcon PT40.
•Refer to
Table 1-1 on page 1-5 for a list of data keys and cycles.
•Refer to
Table 1-2 on page 1-5 for a list of action keys and functions.
CAUTION
Resetting the PT40 is similar to pressing
<Ctrl>+<Alt>+<Delete> on a PC. All data
stored in the portable’s memory is cleared.
Reset
*+. *
2340.book Page 3 Wednesday, January 29, 2003 12:50 PM