Specifications

General Programming Parameters
Product Reference Guide E-9
General Programming Parameters
Table E-6. General Programming Parameters
Code Parameter ID # Type Acceptable Input
Predefined Defaults
D0 D1 D2
Code 39 Enter 1 for On and 0 for Off.
Enable 00 On/Off On or Off Off On On
Minimum length 01 Value 00–60 00 00 00
Maximum length 02 Value 00–60 00 60 20
Enable checksum 03 On/Off On or Off Off Off Off
Send checksum 04 On/Off On or Off Off Off Off
Full ASCII mode 05 On/Off On or Off Off On On
Accumulate mode 06 On/Off On or Off Off On Off
Enable AIAG alternate
check digit
07 On/Off On or Off Off Off Off
Interleaved 2 of 5 Enter 1 for On and 0 for Off.
Enable 08 On/Off On or Off Off On On
Minimum length 09 Value 02–60 02 02 06
Maximum length 0A Value 02–60 02 60 10
Enable checksum 0B On/Off On or Off Off Off Off
Send checksum 0C On/Off On or Off Off Off Off
Use lengths 6 and 14 only
(case code)
0D On/Off On or Off Off Off Off
Codabar Enter 1 for On and 0 for Off.
Enable 20 On/Off On or Off Off On On
Minimum length 21 Value 00–60 00 02 04
Maximum length 22 Value 00–60 00 60 20
Send start/stop 23 On/Off On or Off Off Off Off
Convert Codabar to CLSI 24 On/Off On or Off Off Off Off
Code 93 Enter 1 for On and 0 for Off.
Enable 2C On/Off On or Off Off On On
Minimum length 2D Value 00–50 00 01 02
Maximum length 2E Value 01–50 00 50 20
2340.book Page 9 Wednesday, January 29, 2003 12:50 PM