Specifications
Programming Parameters
E-6 Falcon
®
PT40
Commands cannot be split between two or more bar codes. It is not possible
to have a parameter ID number at the end of one bar code and its setting or
string at the beginning of the next.
Programming Parameters
For a description of serial parameters, refer to Table E-8 on page E-12. For a
complete list of parameters and defaults, refer to
Programming Parameters on
page E-1.
Setting the Hour Format, Time, and Date
Use the PT40’s keyboard to enter the time and date in the current format.
Time
Turn on parameter ID value D8 to set the PT40's real-time clock display to
24-hour (military-style) format. When this parameter is set to
Off, the time is
displayed in 12-hour format. The default time display is 24-hour format. Use
the 12- and 24-hour bar codes to change the format. To set the time on the
PT40’s clock, scan the
Time bar code.
Date
Turn on parameter ID value D9 to set the PT40’s date display to international
format (day/month/year) or off to set it to U.S. format (month/day/year). The
default format is U.S. Format. To set the date in the PT40, scan the
Date bar
code. Use the
International Format bar codes to change the format.Refer to
Clock and Calendar on page D-12 for these bar codes.
Time
*%-*
Date
*%.*
When finished setting the date and time formats, press any function key to return
to the program.
2340.book Page 6 Wednesday, January 29, 2003 12:50 PM