Specifications

Product Reference Guide 2-29
Figure 2-16. Model 8300RD Physical Measurements
18.5mm
28.4mm
Dual Display Single Display
329mm
325mm
292.5mm
227.5mm
116.39mm
112mm
60mm
264mm
116.39mm
112mm
60mm
25.5mm
85.1mm
41.99mm
5. Feed the entire length of the Remote Scale Display interface cable
through the cable routing hole so that the assembled Remote Scale
Display can be positioned over the mounting screw holes.
6. If present, remove the rubber band from the connector end.
7. Install mounting screws or bolts to complete the installation of the
R
emote Scale Display. Take care not to pinch or pierce the interface
cable while securing the Remote Scale Display to the checkstand.