Specifications

7-276 Magellan

8500Xt Scanner

Standard 2 of 5 Length 2

If Standard 2 of 5 Length Control is set to Fixed-Length decoding, this

feature specifies Standard 2 of 5 second fixed length. If Standard 2of 5

Length Control is set to Variable-Length decoding, this feature specifies

the maximum label length.

NOTE

When in Fixed Length mode, if Length 2

is set to the value of 00 (zero),

then only Length 1 will apply.

To set this feature:

1. Scan the SWITCH barcode.

2. Scan the barcode, SET STANDARD 2 OF 5 LENGTH 2 below.

You’ll need to cover any unused barcodes on this and the facing page

to ensur

e that the scanner reads only the barcode you intend to scan.

3. Scan the appropriate digits from the keypad in

Appendix C that rep-

resent the desired label length. The selectable range for this option is

1 to 50. P

ad all single digit numbers with a leading zero to yield a

two-digit entry (01-50).

4. Complete the programming sequence b

y scanning the SWITCH

barcode.

SET STANDARD 2 OF 5 LENGTH 2