Specifications

7-270 Magellan

8500Xt Scanner

Standard 2 of 5 Check Character Calculation

Enables/disables calculation and verification of an optional Standard 2 of

5 check character.

NOTE

If check character calculation is disabled,

the risk is increased that a mis-

read can occur. When disabled, any c

heck character in a barcode is

treated as data character.

To set this feature:

1. Scan the SWITCH barcode.

2. Scan either the enable or disable barcode below. You’ll need to cover

any unused bar

codes on this and the facing page to ensure that the

scanner reads only the barcode you intend to scan.

3. Complete the programming sequence b

y scanning the SWITCH

barcode.

STANDARD 2 of 5 CHECK CHARACTER CALCULATION = DISABLE

STANDARD 2 of 5 CHECK CHARACTER CALCULATION = ENABLE