Specifications

Product Reference Guide 7-251
Codabar Stitching
Enables/disables stitching for Codabar labels. When parts of a Codabar
barcode are presented to the scanner with this feature enabled, the barcode
parts will be assembled by the scanner’s software, and the data will be
decoded if all barcode proofing requirements are met.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes belo
w. You’ll need to cover
any unused barcodes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan.
Complete the programming sequence b
y scanning the SWITCH barcode.
CODABAR STITCHING = DISABLE
CODABAR STITCHING = ENABLE