Specifications

Product Reference Guide 7-249
Codabar Length 1
If Codabar Length Control is set to Fixed-Length decoding, this feature
specifies Codabar first fixed length. If Codabar Length Control is set to
Variable-Length decoding, this feature specifies the minimum label
length.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan the barcode, SET CODABAR LENGTH 1 below. You’ll
need to cover any unused barcodes on this and the facing page to
en
sure that the scanner reads only the barcode you intend to scan.
3. Scan the appropriate digits from the keypad in
Appendix C that
represent the desired label length. The selectable range for this
option is 03 to 50.
Pad all single digit numbers with a leading
zero to yield a two-digit entry (03-50).
4. Complete the programming sequence by scan
ning the SWITCH
barcode.
SET CODABAR LENGTH 1