Specifications

7-212 Magellan

8500Xt Scanner

Code 39 Length 2

If Code 39 Length Control is set to Fixed-Length decoding, this feature

specifies Code 39 second fixed length. If Code 39 Length Control is set to

Variable-Length decoding, this feature specifies the maximum label

length.

NOTE

When in Fixed Length mode, if Length 2 is set to the v

alue of 00, then

only Length 1 will apply

To set this feature:

1. Scan the SWITCH barcode.

2. Scan the barcode, SET CODE 39 LENGTH 2 below. You’ll need

to cover any unused barcodes on this and the facing page to

sure that the scanner reads only the barcode you intend to scan.

3. Scan the appropriate digits from the keypad in

Appendix C that

represent the desired label length. The selectable range for this

option is 00, no

second fixed length, or 01 to 50. Pad all single

digit numbers with a leading zero to yield a two-digit entry (00-

50).

4. Complete the programming seque

nce by scanning the SWITCH

barcode.

SET CODE 39 LENGTH 2