Specifications

Product Reference Guide 7-201
DataBar Expanded Length 1
If DataBar Expanded Length Control is set to Fixed-Length decoding, this
feature specifies DataBar Expanded first fixed length. If DataBar
Expanded Length Control is set to Variable-Length decoding, this feature
specifies the minimum label length.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan the barcode, SET DATABAR EXPANDED LENGTH 1
below. You’ll need to cover any unused barcodes on this and the
f
acing page to ensure that the scanner reads only the barcode you
intend to scan.
3. Scan the appropriate digits from the keypad in
Appendix C that
represent the desired label length. The selectable range for this
option is 00 to 74.
Pad all single digit numbers with a leading
zero to yield a two-digit entry (00-74).
4. Complete the programming sequence by scan
ning the SWITCH
barcode.
SET DATABAR EXPANDED LENGTH 1