Specifications

Product Reference Guide 7-197
DataBar Expanded 2D Component Enable
When this feature is enabled, the software will not decode an DataBar
Expanded barcode with a 2D component associated with it, and the 2D
component will be discarded.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes belo
w. You’ll need to cover
any unused barcodes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scan
ning the SWITCH
barcode.
DATABAR EXPANDED 2D COMPONENT = DISABLE
DATABAR EXPANDED 2D COMPONENT = ENABLE