Specifications

7-154 Magellan
TM
8500Xt Scanner
EAN-13 First Character Transmission
Enables/disables transmission of EAN/JAN-13 first character.
NOTE
This item is ignored when the
advanced feature, Full Label Edit, is enabled.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You’ll need to
co
ver any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming seque
nce by scanning the SWITCH
barcode.
EAN-13 FIRST CHARACTER TRANSMISSION = DISABLE
EAN-13 FIRST CHARACTER TRANSMISSION = ENABLE