Specifications

Product Reference Guide 7-133
Symbology Programming
NOTE
If the scanner’s interface type must be c
hanged, always be sure that inter-
face configuration is the FIRST item scanned during a pr
ogramming ses-
sion. (Selecting an interface type resets ALL other configuration items —
inc
luding symbology programming — to the factory default for that inter-
face type.)
Coupon Control
This feature is used to control the method of processing coupon labels.
For the puposes of this feature, coupon labels are defined as:
1. UPC-A labels that start with a ‘5’
2. GS1 DataBar Expanded labels that start with ‘8110’
The options for this setting are:
•
Disable — Coupon Control is turned off.
•
Enable UPC-A Coupons — UPC-A coupon labels will decode but
GS1 DataBar Expanded coupon labels will not. GS1 DataBar
Expanded labels that are not coupon labels will decode and all
UPC-A labels will decode.
•
Enable GS1 DataBar Expanded Coupons — GS1 DataBar Expanded
coupon labels will decode but UPC-A coupon labels will not.
UPC-A labels that are not coupon labels will decode and all GS1
DataBar Expanded labels will decode.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your choice from the Coupon Control selections below. You’ll
need to co
ver any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
COUPON CONTROL = DISABLE