Specifications

7-126 Magellan

8500Xt Scanner

Single Cable RS-232 Use BCC

Enables/disables the ability of the scanner to use BCC.

To set this feature:

1. Scan the SWITCH barcode.

2. Scan either the enable or disable barcode below. You’ll need to

ver any unused barcodes on this and the facing page to ensure

that the scanner reads only the barcode you intend to scan.

3. Complete the programming seque

nce by scanning the SWITCH

barcode.

SINGLE CABLE RS-232 USE BCC = DISABLE

SINGLE CABLE RS-232 USE BCC = ENABLE