Specifications

7-46 Magellan

8500Xt Scanner

EAS Beep Duration

Sets the duration of the EAS successful deactivation beep, specified in

10ms increments. The beep only occurs if EAS mode is not disabled.

To set the EAS Beep Duration:

1. Scan the SWITCH barcode.

2. Scan the barcode,

SET EAS BEEP DURATION below. You’ll need to

cover any unused barcodes on this and the facing page to ensure that

the scanner

reads only the barcode you intend to scan.

3. Scan the appropriate digits from the keypad in

Appendix C that rep-

resent the desired EAS Beep Duration. The selectable range is 0-

255, whic

h is the timeout in 10-millisecond increments. Pad all sin-

gle and double digit numbers with leading zeroes to yield a three-

digit ent

ry (000-255).

Examples:

000 = EAS beep disabled

001 = 10ms

005 = 50ms

040 = 400ms

250 = 2,500ms (2.5 seconds)

4. Complete the programming sequence b

y scanning the SWITCH

barcode.

SET EAS BEEP DURATION