Specifications

Product Reference Guide 7-3

If you experience difficulties, have questions or require additional infor-

mation, contact your local distributor, or call your dealer or sales represen-

tative.

Programming Overview

The scanner’s programmable feature settings can be modified to accom-

modate your system’s unique requirements. These settings can be commu-

nicated to the scanner in one of two ways:

1. Commands can be sent directly from the host. A limited set of

host commands ar

e available. Refer to

Appendix D for more details

or contact Tech Support.

2. Programming barcode labels can also be used to modify the scan-

ner’s programmable settings. This manual provides the barcode

labels

and instructions necessary to configure the scanner’s fea-

tures and options.

NOTE

When you program the scanner using any of the methods above, the scan-

ner will store the changes until reprogrammed or r

eturned to factory

defaults.

Programming via Handheld Device

The scanner can also accept programming via its auxiliary port using a

handheld scanning device. Eligible handheld devices must have the ability

to transmit Code 128 function codes such as the programming barcodes

presented in this manual. Datalogic

models QuickScan

1000 and

QuickScan

6000 support this functionality. Handheld data format

requirements (baud rate, parity, etc.) are presented in

Appendix F of this

manual. Additionally the programmable feature, Aux Port Mode, must be

set to “External Handheld Input” to allow operation.