Specifications

7-2 Magellan
TM
8500Xt Scanner
Once you know the scanner’s current settings, you can determine what
changes will be required to allow communication with your host system
and/or optional features you choose to modify to customize your installa-
tion. After recording the modifications needed, finish reading this section,
then turn
to the appropriate page and follow the instructions to program
the scanner.
When all scanner features are program
med to your satisfaction, the scan-
ner is ready to be placed into operation.
Customizing Your Scanners Operation
Most scanner programming falls within three general categories:
General Scanner and Scale Features - are features common to all
interface types. Examples include beeper adjus
tments such as vol-
ume and length, read verification settings, etc.
Interface Related Features - are the mandatory settings necessary
to allow communication with your host terminal. Examples of
these
settings are: RS-232 baud rate and parity.
CAUTION
It is possible, via programming barcodes, to change the interface type (for
e
xample: from RS-232 to IBM Port 17). Great care should be taken to select the
correct interface type, since you can cause damage to the scanner and/or
POS terminal by attempting to change to an incompatible interface. ALWAYS
make interface selections with the host cable DISCONNECTED.
NOTE
Ensure that your planned modifications are compatib
le with the current inter-
face. For example, baud rate selections are onl
y valid in the RS-232 interface.
The scanner will sound an error tone when scanning programming labels for
features invalid to the current interface group.
Symbology Programming - gives the scanner the capability to auto-
discriminate as few as one, and as many as all available symbolo-
gies. For optimal scanner performance enable only those
symbologies r
equired. Additionally the scanner may be pro-
grammed with the standard options available for the various sym-
bologies, such as check digit, minimum label length, fixed and
variable len
gth barcodes, etc.