Service manual

METTLER TOLEDO
DIVA Service Manual 24
5 Service and Maintenance
This section provides information on servicing and maintaining the scale including:
 Cleaning and regular maintenance
 Troubleshooting
WARNING
ONLY PERMIT QUALIFIED PERSONNEL TO SERVICE
THIS EQUIPMENT. EXERCISE CARE WHEN MAKING
CHECKS, TESTS AND ADJUSTMENTS THAT MUST BE
MADE WITH POWER ON. FAILING TO OBSERVE
THESE PRECAUTIONS CAN RESULT IN BODILY HARM.
WARNING
DISCONNECT ALL POWER TO THIS UNIT BEFORE
SERVICING OR CLEANING.
5.1 Cleaning and Regular Maintenance
Daily Maintenance:
Wipe the display area and weighing platter with a clean, soft cloth with water or a mild glass cleaner.
Do not use any types of industrial solvents. These may damage the display and platter finish.
Weekly Maintenance:
Remove the platter, and clean out all loose particles and debris from around the scale base and
spider arms. This needs to be done at least once a month, although it is recommended that this
maintenance be performed on a weekly basis.
Regular maintenance inspections by a qualified service technician are also recommended every six
months.
Note: It is necessary to ensure proper weighing after maintenance is performed on the
scanner-scale. Place a test weight on the unit and verify that the scale is able to get a stable weight
and a correct reading.