Service manual

METTLER TOLEDO
DIVA Service Manual 11
Price Computing Version Weigh Only Version
You can press the Tare key to move to Grp 2, 3, or 4. To go into a particular Group, press the Zero
Key. Below is what you will see when going into the first Step of Group 1.
Price Computing Version Weigh Only Version
Refer to Section 3.3 Setup and Soft Switch Default Table for all available settings.
3.2 Master setup mode:
This mode allows an operator to change certain softswitches not protected by a seal. To get into
Master mode, press and hold >T< key for eight seconds until “Grp 1” is displayed. Refer to the
Section 3.3 Set Up Softswitch and Default Table for the accessibility of softswitches via keyboard.
The scale can be configured for your specific needs through a special interactive set up procedure. In
order to access the various prompts, you must utilize the following keys during the scale setup mode.
This key is used to accept a choice and then advance one softswitch at a time.
This key is used to step through the options.
Grp 1
Grp 1
1.1 DE
Grp 1
Step 1
DE