Service manual

METTLER TOLEDO

DIVA Service Manual 6

2 Installation

2.1 Precautions

Before you install your DIVA scale, keep in mind the following factors, which might have a negative

influence on the scale's operation:

 Vibration diminishes the scale’s ability to measure accurately. Excessive vibration from

equipment such as conveyors can cause inaccurate and non-repeatable readings.

 Be sure the scale is leveled properly.

 Air currents can also diminish a scales performance. Avoid placing the scale in front of or

directly under air vents.

 Other than items being weighed, keep the scale free from objects rubbing or pressing against

the platter.

2.2 Contents of Packaging

Package contents for all DIVA units include:

 DIVA scale base

 Operation manual

 Optional display, including cable and sealing kit (only 4-line display)

 Wall mount power supply

 Communication cable

2.3 Setup

1. Open the box, carefully remove the packing material, take all items out of the carton.

2. Attach the display as described below, depending on which version of scale you ordered:

For Price Computing Version:

A: Pull the connector of the cable through the holes of the

table surface and tower mounting bracket

B: Put (2) screws though the (2) arch holes on the bracket

and (2) holes on the table surface

C: Attach cover to the surface of table with (2) nuts.

D: Connect the cable to the connector at the bottom of the

tower display

E: Attach the base of the display to the mounting bracket

by insuring that the (2) pins on the bracket are inserted

in the holes of the base to attach the tower and snap

the tower into place

Tower base

Attachment Screws (2)

Connector of cable

Tower Mounting Bracket

Table surface

ttachment wing nuts (2)

for Attachment Screws

Pin attachment holes

Attachment pins (2)