Specifications

SETTING DOUBLE READ TIMEOUT

The double read timeout sets a time limit that deter-

mines how much time must pass before reading the

same label again (e.g. two identical items in succession).

The selections are:

• Set timeout = 400 milliseconds

• Set timeout = 600 milliseconds

• Set timeout = 800 milliseconds

• Set timeout = 1 second

DOUBLE READ TIMEOUT = 400MS

Sets the time you must wait between reading the same

label again to 400ms. This is the recommended setting.

NOTE

If the incidence of multiple reads is not

acceptable, increase the Double Read

Timeout setting to the next higher level.

6 400077 000400