Specifications

10
• If an invalid label is scanned when in
Programming Mode, the scanner will
emit a low tone to indicate that the
label is either not a programming label
or that it contains values outside of the
acceptable programming range.
• After five minutes of inactivity in
Programming Mode, the scanner will
revert to normal Operating Mode. Any
options set during the programming
session will be stored and activated.
• If confusion arises as to which options
have been set during a programming
session, scanning the Return to Factory
Settings label will reset the scanner to
the original factory defaults for all
options, regardless of interface type.
We recommend that you use the table
provided in the back of this manual to
record all changes that you make. This
will help to ensure that you can record
all modifications that you have made
to the factory default configuration.
This will be very helpful if you must
return Magellan to the factory default
settings.